Skip to content

Guide · Staking

Liquid staking and restaking risk: stETH, LSTs and EigenLayer

How liquid staking tokens like stETH work, what risk they add over solo staking, and how EigenLayer-style restaking layers AVS-specific slashing risk on top. Not financial advice.

By Etherelysium Editorial TeamUpdated 18 November 20267 min read

Liquid staking and restaking risk: stETH, LSTs and EigenLayer
Share X LinkedIn

Solo-staking Ethereum requires 32 ETH and your own validator infrastructure. Most people don’t have either, which is why liquid staking exists: pool many smaller deposits together, run the validators on depositors’ behalf, and issue each depositor a tradable token representing their claim. Restaking takes that same staked (or liquid-staked) ETH and extends its economic security to secure additional, separate systems — which is a genuinely different and additional layer of risk, not a bonus yield with no cost attached.

How liquid staking works, mechanically

Since pooling isn’t natively built into Ethereum’s protocol, liquid staking is implemented as a separate smart-contract layer on top of it. A depositor sends ETH to a staking pool’s contract; the pool combines deposits across many users to fund 32-ETH validators, which it runs itself or delegates to a set of operators; in return, the depositor receives a liquid staking token (LST) — stETH is the best-known example — representing a claim on the deposited ETH plus its staking rewards.

LSTs generally work one of two ways: a rebasing token increases in balance over time as rewards accrue, while an exchange-rate token keeps a fixed balance but becomes redeemable for a growing amount of ETH. Either way, the LST can be held, used as collateral elsewhere in DeFi, or sold on the open market — which is the entire point of “liquid” staking versus locking ETH away for the validator’s full exit process.

What liquid staking adds on top of solo-staking risk

  • Smart contract risk: a bug or exploit in the pool’s contracts can affect deposited funds in ways that have nothing to do with the underlying validators behaving correctly.
  • Peg and liquidity risk: the LST can trade below the value of the ETH backing it, especially during market stress or when redemptions are slow, because the token’s market price and its underlying redemption value are two different things that can temporarily disconnect.
  • Operator centralization: if a small number of operators run a large share of a pool’s validators, that concentration creates censorship, value-extraction, and single-point-of-failure risks that solo staking does not have.
  • Slashing pass-through: if one of the pool’s validators gets slashed, that penalty is typically spread across all token holders rather than falling only on whoever’s deposit funded that specific validator.
  • Governance and upgrade risk: fees, operator sets, and token mechanics can change through the protocol’s own governance process, sometimes without every token holder getting an individual vote.

None of this makes liquid staking unsafe by definition — it makes it a different risk profile from solo staking, trading some of solo staking’s own burdens (32 ETH minimum, running hardware, the exit queue) for a different set of intermediary risks that are worth understanding on their own terms rather than assuming away.

Restaking: stacking a second layer of risk on top

Restaking, the model popularized by EigenLayer, lets ETH that is already staked (natively or via an LST) also secure additional, separate systems called AVSs (actively validated services) — things like oracle networks, data availability layers, or other infrastructure that need their own economic security but don’t want to bootstrap a brand-new token and validator set from scratch.

The mechanics run through delegation: a restaker delegates their restaked balance to an operator, who chooses which AVSs to run. Each AVS defines its own slashing conditions in its own contract, and operators register into specific operator sets to accept the slashing conditions attached to that set, rather than every AVS being able to slash every delegator’s entire balance by default. Slashing under this model is a penalty for an operator failing to properly carry out an AVS’s assigned tasks, enforced by that AVS’s own slashing contract.

The added risk is structural: a restaker is now exposed not just to their own validator’s behavior, but to the correctness of every AVS’s slashing logic their chosen operator has opted into, and to that operator’s own competence running all of them at once. A bug or a governance failure in an AVS the restaker may never have directly evaluated can still result in a loss, and the delegator does not control which AVSs an operator picks — delegation is typically all-or-nothing to a single operator, not something a depositor can granularly opt in or out of per AVS.

Reading a liquid staking or restaking product honestly

Three questions are worth asking before using any specific LST or restaking product: how concentrated is the validator operator set behind it, what exactly triggers slashing and who defines that trigger, and how has the token’s market price tracked its underlying redemption value during past periods of stress. A product’s advertised yield says nothing about any of these; the yield is compensation for risks that have to be evaluated separately from the number itself.

The exit side of liquid staking

Getting out of a liquid staking position works one of two ways: redeeming the LST through the protocol itself, which depends on available liquidity and the underlying validator exit queue, or simply selling the token on the open market, where its price depends on buyers and sellers rather than the protocol’s own redemption mechanics. During calm markets these two paths tend to track each other closely; during stress, the gap between them is exactly where peg risk shows up, and it can widen faster than many holders expect.

Why restaking is not just extra yield

It is tempting to read restaking as a way to earn an additional return on ETH that was otherwise sitting idle while staked. That framing skips the part that actually matters: the additional return is compensation for underwriting additional, specific risks — the correctness of each AVS’s own code and slashing logic, and the operational quality of the operator managing all of it — that did not exist before opting in. A higher combined yield does not mean a free upgrade to the same validator; it means a different, larger set of things has to go right for that yield to actually be paid out safely.

A reasonable rule of thumb: treat every additional layer — solo staking, then liquid staking, then restaking on top of that — as adding its own independent set of things that can go wrong, rather than as a strictly safer or strictly better version of the layer beneath it. Stacking layers can be a deliberate, informed choice, but it is not a risk-free upgrade path.

This also means two products advertising similar headline yields are not necessarily taking similar risks to get there. The honest comparison is mechanism against mechanism — operator count, slashing triggers, exit liquidity — not yield percentage against yield percentage.

Checking an operator set’s size and an AVS’s own audit history before delegating takes a few minutes and is the closest thing to due diligence available here.

Risk note

Liquid staking and restaking both add intermediary and smart-contract risk on top of base validator risk, in exchange for liquidity or additional yield. Higher advertised yield is not evidence of lower risk; it is usually the opposite, and the specific mechanism generating it should be understood before relying on it.

Not financial advice. Nothing on this page is a recommendation to buy, sell, stake, bridge, or avoid any asset or protocol.

FAQ

Is an LST the same thing as staked ETH?

No. An LST is a separate token issued by a staking pool representing a claim on staked ETH and its rewards. Its market price can diverge from the ETH actually backing it, particularly under stress or thin liquidity.

Can I lose money from slashing if I hold an LST rather than running my own validator?

Potentially, yes. Most liquid staking pools spread a slashing penalty on any of their validators across all token holders, rather than isolating it to one depositor’s specific funds.

What is an AVS?

An actively validated service: infrastructure such as an oracle network or a data availability layer that needs its own independent economic security, which EigenLayer-style restaking lets operators provide using already-staked ETH instead of a fresh token and validator set.

Does restaking increase my slashing risk?

It can. Restaked ETH becomes exposed to each AVS’s own slashing conditions in addition to ordinary consensus-layer slashing, and a delegator does not control which AVSs their chosen operator opts into.

Frequently asked questions

Is an LST the same thing as staked ETH?
No. An LST is a separate token issued by a staking pool representing a claim on staked ETH and its rewards. Its market price can diverge from the ETH actually backing it, particularly under stress or thin liquidity.
Can I lose money from slashing if I hold an LST rather than running my own validator?
Potentially, yes. Most liquid staking pools spread a slashing penalty on any of their validators across all token holders, rather than isolating it to one depositor's specific funds.
What is an AVS?
An actively validated service: infrastructure such as an oracle network or a data availability layer that needs its own independent economic security, which EigenLayer-style restaking lets operators provide using already-staked ETH instead of a fresh token and validator set.
Does restaking increase my slashing risk?
It can. Restaked ETH becomes exposed to each AVS's own slashing conditions in addition to ordinary consensus-layer slashing, and a delegator does not control which AVSs their chosen operator opts into.

Educational content, human-edited and possibly AI-assisted. It describes how systems work and is not financial, legal or tax advice. Report an error via our corrections page.

More in Staking

Related articles

See all